Upravit stránku

Specification

Technical description

References
Photos

Specification

ski lift effective transport distance

200 - 400 m

drive and return bullwheel diameter(rubber lined)

2.25 m

distance of ropes along the line

2.25 m

sheave trains

with catchers and signals indicating rope slippage and location

sheave diameter

200 mm

tensioning

hydraulic, self-acting

carriers

single, hydraulic

drive output range

7.5 – 18.5 kW

haul rope

Ø 12.5 - 14 mm, galvanised steel

conveying speed

inspection 0.5 m/s, continuously adjustable 0.5 – 2.7 m/s

capacity

max. 900 persons/h, effective 600 persons/h

surface finish of steel parts

hot-dip galvanized

Technical description

Drive terminal

This terminal is usually placed at the bottom and is used for tensioning and passenger embarking.
It consists of a load bearing steel structure, hydraulic haul rope tensioning system, an engine with a gear box and anti-roll back device, a drive bullwheel, guide sheave trains and leading sheaves.
The steel structure consists of a supporting column anchored in a concrete slab, a super-structure with sheaves and a sliding beam to which the drive unit with the bullwheel is bolted. Also mounted onto the super-structure is a beam with sheave trains and beams with guide sheaves.
Hydraulic system – a double-acting hydraulic motor - is seated between the fixed and sliding sections of the drive terminal. The hydraulic unit is seated on top of the supporting column.
The drive bullwheel is seated on the gear box output shaft. It is a weldment with spoke bracing and a rubber lined groove.  There is a safety rim at the bottom side of the wheel to prevent the rope slipping and also to stabilise carrier assembly.

As an option, the terminal can also be delivered as a disembarking terminal, and/or as a fixed one and placed at the top.  

Return terminal

It is mostly fixed and placed at the top and serves for disembarking.
The steel structure consists of a supporting column anchored into an independent concrete slab, compression braces and arms, carrying sheave assemblies, and a platform. At the top section of the supporting column, the return bullwheel is mounted by means of a screw flange joint. The return bullwheel is a weldment with spoke bracing and a rubber lined groove.  There is a safety rim at the bottom side of the wheel to prevent the rope slipping and also to stabilise carrier assembly. Assemblies and the return bullwheel can be accessed by means of a ladder and service platforms with handrails.

As an option, the terminal can also be delivered as an embarking terminal, and/or as a tensioning one and placed at the bottom.

Support tower

The "T-shape" support tower consists of a steel supporting column, anchored into an independent concrete slab, and a column head, to which sheave trains are attached. At the top section of the supporting column, service platforms are mounted. Platforms and sheave assemblies can be reached by a ladder.

Sheave trains

Sheave trains/assemblies have the role of guiding the line at the support tower. A sheave train consist of an appropriate number of rubber lined Ø200mm sheaves. Sheave trains on both lines of the lift are furnished with a safety device to detect rope coming off the wheels – a brittle bar.

References

• ŠACHTY ski area, Vysoké nad Jizerou, Krkonoše - 11 kW, capacity 640 persons/h, drive and tensioning terminal at the bottom
• JANOVA HORA ski area, Vítkovice, Krkonoše - 15 kW, capacity 687 persons/h, drive and tensioning terminal at the top
• JEŠTĚD sports grounds - Bucharka, Liberec, Jizerské Mountains – 9.2 kW, capacity 655 persons/h, drive and tensioning terminal at the bottom
• Kašperské Mountains ski area, Šumava – 18.5 kW, capacity 718 persons/h, drive and tensioning terminal at the bottom
• Přemyslov ski area, Jeseníky - 15 kW, capacity 840 persons/h, drive and tensioning terminal at the bottom
• Žiarce FUN park, Pavčina Lehota, Nízké Tatry, SK - 15 kW, capacity 695 persons/h, drive and tensioning terminal at the bottom
• Druskininkai Snow Arena, městská aréna, LT – 7.5 kW, capacity 300 persons/h, drive and tensioning terminal at the bottom
• Kalita skiing centre, Anykščiai, vrch Kalitos, LT - 11 kW, capacity 720 persons/h, drive and tensioning terminal at the bottom

A  COMPLETE LIST OF ALL REFERENCESA
TECHNICAL DATA FOR SKI LIFTS CAN BE DOWNLOADED HERE→

Photos

Would you like to know more about SINGLE ski lift? Please contact us.

  • Fields marked with an asterisk (*) are required.